定制鐵藝大門，最怕的是“做出來和想象的不一樣”。問題的根源往往不在廠家，而在定制前溝通不充分。以下5類信息，是定制鐵藝大門前必須提供給廠家的核心資料。

The biggest fear of customizing a wrought iron gate is that it may not be as imagined. The root of the problem often lies not in the manufacturer, but in insufficient communication before customization. The following 5 types of information are the core materials that must be provided to the manufacturer before customizing iron gates.

第一類：基礎尺寸與安裝環境。

Category 1: Basic dimensions and installation environment.

門洞尺寸是定制的核心前提。需提供寬度、高度、墻體厚度的精確數值（單位：毫米），建議現場測量后標注是否包含兩側墻體裝飾（如石材、瓷磚）。若大門為雙開，需明確單扇寬度是否均等。

The size of the door opening is the core prerequisite for customization. Accurate values (in millimeters) for width, height, and wall thickness are required. It is recommended to measure on-site and indicate whether it includes wall decorations on both sides (such as stone and tiles). If the door is double open, it is necessary to clarify whether the width of each single leaf is equal.

開門方式（平開、推拉、折疊）決定了所需的操作空間。平開門需預留門扇完全打開時的旋轉半徑，避免與墻體、臺階、綠植等沖突。

The opening method (flat opening, sliding, folding) determines the required operating space. The swing door should reserve a rotation radius when the door leaf is fully opened to avoid conflicts with walls, steps, green plants, etc.

地面材質（水泥地、石板、草坪等）影響預埋件或固定方式的選擇。墻體材質（磚墻、混凝土、鐵藝柱等）決定固定方式——膨脹螺絲或焊接。

The ground material (cement floor, slate, lawn, etc.) affects the selection of embedded parts or fixing methods. The material of the wall (brick wall, concrete, wrought iron column, etc.) determines the fixing method - expansion screws or welding.

第二類：功能需求。

The second category: functional requirements.

平開門有單向/雙向之分，推拉門需左右滑動空間，電動款需配備電機、遙控裝置或與智能系統聯動（人臉識別、手機APP控制）。

There are one-way/two-way options for swing doors, and sliding doors require space to slide left and right. Electric models need to be equipped with motors, remote control devices, or linked with intelligent systems (facial recognition, mobile app control).

防盜性能方面，是否需要加厚管材、加密花型（減少攀爬空間）、配備防撬鎖具（如C級鎖芯）。防護功能方面，是否需要加裝防蚊紗網、防爆玻璃。通行需求方面，日常通行的是行人、轎車還是貨車，后者需明確車輛高度和寬度。

In terms of anti-theft performance, is it necessary to thicken the pipes, increase the pattern (to reduce climbing space), and equip anti pry locks (such as C-grade lock cores). In terms of protective functions, is it necessary to install mosquito nets and explosion-proof glass. In terms of traffic demand, whether pedestrians, cars, or trucks are used for daily traffic, the latter requires clear vehicle height and width.

第三類：設計與風格。

The third category: design and style.

說明與建筑風格的匹配需求——歐式古典（雕花、卷草紋）、現代簡約（直線條、幾何圖案）、中式復古（回紋、格柵）?？商峁﹨⒖紙D片輔助溝通。

Explain the matching requirements with the architectural style - European classical (carved, rolled grass pattern), modern simple (straight line, geometric pattern), Chinese retro (Hui Wen, grid). Reference pictures can be provided to assist communication.

花型與紋飾方面，是否有特定圖案要求（家族徽章、企業LOGO）。顏色與涂層方面，選擇表面處理方式（靜電噴涂、熱鍍鋅、烤漆）及具體顏色（提供色卡號，如RAL色卡）。配件樣式方面，門把手、合頁、鎖具的材質（黃銅、不銹鋼）和造型需與大門風格統一。

Are there any specific pattern requirements (family crest, corporate logo) for flower patterns and decorations. In terms of color and coating, choose surface treatment methods (electrostatic spraying, hot-dip galvanizing, baking paint) and specific colors (provide color card numbers, such as RAL color cards). In terms of accessory styles, the materials (brass, stainless steel) and shapes of door handles, hinges, and locks should be consistent with the style of the main door.

第四類：材質與工藝。

Category 4: Materials and Craftsmanship.

說明管材/板材的材質（Q235普通碳素鋼、304不銹鋼），戶外建議優先選擇鍍鋅鋼或不銹鋼。管材規格如直徑50mm、壁厚3mm。

Please specify the material of the pipes/plates (Q235 ordinary carbon steel, 304 stainless steel). For outdoor use, it is recommended to prioritize galvanized steel or stainless steel. The pipe specifications include a diameter of 50mm and a wall thickness of 3mm.

防銹與防腐處理方面，明確工藝步驟——是否經過酸洗除銹、熱鍍鋅（整體還是局部）、底漆+面漆噴涂。若設計包含玻璃，需說明玻璃類型（鋼化玻璃、夾膠玻璃）、厚度、顏色及固定方式。

In terms of rust prevention and anti-corrosion treatment, clarify the process steps - whether they have undergone acid pickling for rust removal, hot-dip galvanizing (overall or local), and primer+topcoat spraying. If the design includes glass, it is necessary to specify the type of glass (tempered glass, laminated glass), thickness, color, and fixing method.

第五類：預算與售后。

Category 5: Budget and after-sales service.

說明是否需要廠家提供上門安裝服務（尤其涉及電動系統或復雜結構時），以及售后保障范圍（保修期時長、維修響應時間）。

Explain whether the manufacturer needs to provide on-site installation services (especially when it comes to electric systems or complex structures), as well as the scope of after-sales support (warranty period duration, repair response time).

本文由濟南鐵藝大門友情奉獻.更多有關的知識請點擊:http://www.houboip.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from Jinan Iron Art Gate For more information, please click: http://www.houboip.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.